Привет всем. Принесли ZTE Blade X3 (T620) стоит FRP блокировка хотел открыт через nckdongle не получился вот логи:
Exe version: NCKDongle AndroidMTK 2.5.6.6
Selected model: MT6735M
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051373253 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Checking data....wait!

Error: S_DA_SDMMC_CONFIG_FAILED
[3147]Error: S_DA_SDMMC_CONFIG_FAILED
Wait untill phone will start charging.
All done.