asg-gealt
18.12.2013, 10:43
Всем привет
Новый S5839i страдает перезагрузкой или зависанием в случайный момент времени. Особенно любит перегрузится после ухода в спящий. Прошил его как S5830i (прошивка от него подходит) - без изменений. Попадалось кому такое чудо? Как решили? Под Самсунги есть UFS, RIFF, Octopus.
Platform: Samsung Broadcom
Selected port: COM1
Selected model: GT-S5830I
Connecting to phone on COM9
Detected phone model: GT-S5830i
SW Version: S5830iXXLK3/S5830iOXELH1/S5830iXXLK1/S5830iXXLK3
HW Version: GT-S5839OKIVDI
Phone IMEI A: 354423-05-775781-3
Firmware compiled date: Thu Nov 22 09:21:44 KST 2012
Phone SN: RF1D72RAKEF
Android version: 2.3.6 (GINGERBREAD)
-----------------------------------------------------------------------------------
To connect GT-S5570 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: PDA_S5830iXXLK3_REV00.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S5830I phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing bcm_boot section...
bcm_boot section has been written successfully.
Writing umts_cal section...
umts_cal section has been written successfully.
Writing sysparm_dep section...
sysparm_dep section has been written successfully.
Writing loke section...
loke section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing system section...
system section has been written successfully.
Writing userdata section...
userdata section has been written successfully.
Writing param_lfs section...
param_lfs section has been written successfully.
Writing modem section...
modem section has been written successfully.
Writing cache section...
cache section has been written successfully.
Firmware writing successfully completed.
Новый S5839i страдает перезагрузкой или зависанием в случайный момент времени. Особенно любит перегрузится после ухода в спящий. Прошил его как S5830i (прошивка от него подходит) - без изменений. Попадалось кому такое чудо? Как решили? Под Самсунги есть UFS, RIFF, Octopus.
Platform: Samsung Broadcom
Selected port: COM1
Selected model: GT-S5830I
Connecting to phone on COM9
Detected phone model: GT-S5830i
SW Version: S5830iXXLK3/S5830iOXELH1/S5830iXXLK1/S5830iXXLK3
HW Version: GT-S5839OKIVDI
Phone IMEI A: 354423-05-775781-3
Firmware compiled date: Thu Nov 22 09:21:44 KST 2012
Phone SN: RF1D72RAKEF
Android version: 2.3.6 (GINGERBREAD)
-----------------------------------------------------------------------------------
To connect GT-S5570 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: PDA_S5830iXXLK3_REV00.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S5830I phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing bcm_boot section...
bcm_boot section has been written successfully.
Writing umts_cal section...
umts_cal section has been written successfully.
Writing sysparm_dep section...
sysparm_dep section has been written successfully.
Writing loke section...
loke section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing system section...
system section has been written successfully.
Writing userdata section...
userdata section has been written successfully.
Writing param_lfs section...
param_lfs section has been written successfully.
Writing modem section...
modem section has been written successfully.
Writing cache section...
cache section has been written successfully.
Firmware writing successfully completed.