aragoes
27.11.2013, 20:17
iPad New, максимальной вариации.
Отдыхали за границей, взяли его с собой.Был в чехле, пе перегревался, не топился, но прекрасным днём потерял сим карту.
В РФ уже попытались его прошить, но ошибка -1.
После его сдали в сервис, после он попал ко мне.
Компаунд весь на месте, единственное, что в СЦ сделали-закидали проводками межплатный шлейф, но сделали это не очень аккуратно, они коротили и т.д. и т.п.
Занялись им мы, отпаяли шлейф, прочистили, запаяли обратно, закидали проводами.Всё, кз пропало.Прошивка, ошибка 3, как была на iOS 7(на 6 это -1) так и осталась.Логи прилагаю.Так вот, читал зарубежные форумы, там даже реболлом не победили, а как среди Вас, были победы, посоветуете ли что?
log, файлом почему то не грузится, гружу текстом:
[18:47:23.0211]
[18:47:23.0211] entering update_iBoot
[18:47:23.0211] found 'AppleImage3NORAccess' object in IORegistry
[18:47:23.0211] entering update_iBoot_image3_NOR_access
[18:47:23.0211] write_image3_data: flashing illb data (length = 0x24a1a)
[18:47:23.0211] write_image3_data: flashing SCAB data (length = 0xaf0)
[18:47:23.0211] ticket updated
[18:47:23.0211] write_image3_data: flashing ibot data (length = 0x4718c)
[18:47:23.0211] write_image3_data: flashing chg1 data (length = 0x88cc)
[18:47:23.0211] write_image3_data: flashing bat0 data (length = 0x1d40c)
[18:47:23.0211] write_image3_data: flashing batF data (length = 0x1a4cc)
[18:47:23.0211] write_image3_data: flashing logo data (length = 0x45cc)
[18:47:23.0211] write_image3_data: flashing recm data (length = 0x1e64c)
[18:47:23.0211] write_image3_data: flashing dtre data (length = 0x14b0c)
[18:47:23.0211] write_image3_data: flashing chg0 data (length = 0x260c)
[18:47:23.0211] write_image3_data: flashing bat1 data (length = 0x148c)
[18:47:23.0211] write_image3_data: flashing glyP data (length = 0x3a8c)
[18:47:23.0211] entering update_gas_gauge
[18:47:23.0211] entering update_ir_mcu
[18:47:23.0211] looking for mcu nub...no entry from path!
[18:47:23.0211] TiSerialFlasher not supported on this platform. Exiting.
[18:47:23.0211] entering update_baseband
[18:47:23.0211] update_baseband: registering for progress notifications
[18:47:23.0211] create_baseband_update_options: Got imeisv: 8
[18:47:23.0211] baseband updater options = <CFBasicHash 0x17560ca0 [0x336ae0]>{type = mutable dict, count = 6,
[18:47:23.0211] entries =>
[18:47:23.0211] 0 : <CFString 0x12b1f8 [0x336ae0]>{contents = "SystemRoot"} = <CFString 0x17560360 [0x336ae0]>{contents = "/mnt1"}
[18:47:23.0211] 1 : <CFString 0x12b248 [0x336ae0]>{contents = "IMEISwVersion"} = <CFNumber 0x1765a120 [0x336ae0]>{value = +8, type = kCFNumberSInt32Type}
[18:47:23.0211] 2 : <CFString 0x12b2a8 [0x336ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x336e98 [0x336ae0]>{value = false}
[18:47:23.0211] 3 : <CFString 0x12b188 [0x336ae0]>{contents = "forceUpdate"} = <CFBoolean 0x336e90 [0x336ae0]>{value = true}
[18:47:23.0211] 5 : <CFString 0x12b2b8 [0x336ae0]>{contents = "disablePing"} = <CFBoolean 0x336e90 [0x336ae0]>{value = true}
[18:47:23.0211] 6 : <CFString 0x12b1a8 [0x336ae0]>{contents = "DisallowFusiing"} = <CFBoolean 0x336e90 [0x336ae0]>{value = true}
[18:47:23.0211] }
[18:47:23.0211]
[18:47:23.0211] update_baseband: querying baseband info
[18:47:23.0211] bbupdater: BEGIN: Querying info at stage initial
[18:47:23.0211] bbupdater: BEGIN: Preparing Initial stage
[18:47:23.0211] bbupdater: Requested boot mode: kBBUBootModeNone
[18:47:23.0211] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[18:47:23.0211] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[18:47:23.0211] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[18:47:23.0211] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[18:47:23.0211] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[18:47:23.0211] bbupdater: Creating transport, attempts remaining 1...bbupdater: OK
[18:47:23.0211] bbupdater: Baseband VendorID [0x5C6] ProductID [0x9008]
[18:47:23.0211] bbupdater: Modem not booting
[18:47:23.0211] bbupdater: END: Preparing Initial stage
[18:47:23.0211] bbupdater: END: Querying info at stage initial
[18:47:23.0211] bbupdater: BEGIN: Querying info at stage first
[18:47:23.0211] bbupdater: BEGIN: Preparing first stage
[18:47:23.0211] bbupdater: END: Preparing first stage
[18:47:23.0211] bbupdater: Connecting to Loader...bbupdater: OK
[18:47:23.0211] bbupdater: Getting Version...bbupdater: OK
[18:47:23.0211] bbupdater: Loader version: PBL-DownloaderVER1.0
[18:47:23.0211] bbupdater: Fusing disallowed, will treat as fused
[18:47:23.0211] bbupdater: END: Querying info at stage first
[18:47:23.0211] update_baseband: query returned <CFBasicHash 0x1765dbd0 [0x336ae0]>{type = mutable dict, count = 5,
[18:47:23.0211] entries =>
[18:47:23.0211] 2 : <CFString 0x12b458 [0x336ae0]>{contents = "VendorID"} = <CFNumber 0x1755cdf0 [0x336ae0]>{value = +3, type = kCFNumberSInt32Type}
[18:47:23.0211] 3 : <CFString 0x129b68 [0x336ae0]>{contents = "ChipID"} = <CFNumber 0x1765dc50 [0x336ae0]>{value = +4587745, type = kCFNumberSInt32Type}
[18:47:23.0211] 4 : <CFString 0x12b4a8 [0x336ae0]>{contents = "FusingStatus"} = <CFNumber 0x1755cdf0 [0x336ae0]>{value = +3, type = kCFNumberSInt32Type}
[18:47:23.0211] 5 : <CFString 0x12b448 [0x336ae0]>{contents = "CertID"} = <CFNumber 0x17658fb0 [0x336ae0]>{value = +4, type = kCFNumberSInt32Type}
[18:47:23.0211] 6 : <CFString 0x12b2f8 [0x336ae0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[18:47:23.0211] }
[18:47:23.0211]
[18:47:23.0211] update_baseband: requesting baseband firmware data
[18:47:23.0211] update_baseband: received data from host (120519 bytes)
[18:47:23.0211] update_baseband: performing next update stage
[18:47:23.0211] bbupdater: BEGIN: Perform stage at first
[18:47:23.0211] bbupdater: Loading...
[18:47:23.0211] bbupdater: 0x4001a100 of 0x4003d55c (18 percent)
[18:47:23.0211] bbupdater: 0x40022200 of 0x4003d55c (37 percent)
[18:47:23.0211] bbupdater: 0x4002a300 of 0x4003d55c (55 percent)
[18:47:23.0211] bbupdater: 0x40032400 of 0x4003d55c (74 percent)
[18:47:23.0211] bbupdater: 0x4003a500 of 0x4003d55c (93 percent)
[18:47:23.0211] bbupdater: 0x4003d55c of 0x4003d55c (100 percent)
[18:47:23.0211] bbupdater:
[18:47:23.0211] bbupdater: Launching...bbupdater: OK
[18:47:23.0211] bbupdater: END: Perform stage at first
[18:47:23.0211] send_bbupdate_status: sending baseband update status to host
[18:47:23.0211] update_baseband: querying baseband info
[18:47:23.0211] bbupdater: BEGIN: Querying info at stage second
[18:47:23.0211] bbupdater: BEGIN: Preparing Second stage
[18:47:23.0211] bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
[18:47:23.0211] bbupdater: Baseband VendorID [0x5C6] ProductID [0x9008]
[18:47:23.0211] bbupdater: END: Preparing Second stage
[18:47:23.0211] bbupdater: Saying Hello...001035.299696 AppleUSBOHCIPort@3100000::resetAndCreateDevice: failed to address device (0xe00002ed), disabling port
[18:47:23.0211] bbupdater: FAILED(kBBUReturnIOError)
[18:47:23.0211] bbupdater: END(kBBUReturnIOError): Querying info at stage second
[18:47:23.0211] send_bbupdate_status: sending baseband update status to host
[18:47:23.0211] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed connecting to programmer while querying information in the second stage.)
[18:47:23.0211] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[18:47:23.0211] 1: BBUpdater/3: Failed connecting to programmer while querying information in the second stage.
[18:47:23.0211] unable to convert ramrod error 1004
[18:47:23.0211]
[18:47:23.0211] ==== end of device restore output ====
[18:47:23.0269] AMRAuthInstallDeletePersonalizedBundle
[18:47:23.0564] Restore completed, status:3
[18:47:23.0564] Failure Description:
[18:47:23.0564] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[18:47:23.0564] Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[18:47:23.0564] Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[18:47:23.0564] Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[18:47:23.0564] Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed querying baseband info)
[18:47:23.0564] Depth:5 Error:The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed connecting to programmer while querying information in the second stage.)
Отдыхали за границей, взяли его с собой.Был в чехле, пе перегревался, не топился, но прекрасным днём потерял сим карту.
В РФ уже попытались его прошить, но ошибка -1.
После его сдали в сервис, после он попал ко мне.
Компаунд весь на месте, единственное, что в СЦ сделали-закидали проводками межплатный шлейф, но сделали это не очень аккуратно, они коротили и т.д. и т.п.
Занялись им мы, отпаяли шлейф, прочистили, запаяли обратно, закидали проводами.Всё, кз пропало.Прошивка, ошибка 3, как была на iOS 7(на 6 это -1) так и осталась.Логи прилагаю.Так вот, читал зарубежные форумы, там даже реболлом не победили, а как среди Вас, были победы, посоветуете ли что?
log, файлом почему то не грузится, гружу текстом:
[18:47:23.0211]
[18:47:23.0211] entering update_iBoot
[18:47:23.0211] found 'AppleImage3NORAccess' object in IORegistry
[18:47:23.0211] entering update_iBoot_image3_NOR_access
[18:47:23.0211] write_image3_data: flashing illb data (length = 0x24a1a)
[18:47:23.0211] write_image3_data: flashing SCAB data (length = 0xaf0)
[18:47:23.0211] ticket updated
[18:47:23.0211] write_image3_data: flashing ibot data (length = 0x4718c)
[18:47:23.0211] write_image3_data: flashing chg1 data (length = 0x88cc)
[18:47:23.0211] write_image3_data: flashing bat0 data (length = 0x1d40c)
[18:47:23.0211] write_image3_data: flashing batF data (length = 0x1a4cc)
[18:47:23.0211] write_image3_data: flashing logo data (length = 0x45cc)
[18:47:23.0211] write_image3_data: flashing recm data (length = 0x1e64c)
[18:47:23.0211] write_image3_data: flashing dtre data (length = 0x14b0c)
[18:47:23.0211] write_image3_data: flashing chg0 data (length = 0x260c)
[18:47:23.0211] write_image3_data: flashing bat1 data (length = 0x148c)
[18:47:23.0211] write_image3_data: flashing glyP data (length = 0x3a8c)
[18:47:23.0211] entering update_gas_gauge
[18:47:23.0211] entering update_ir_mcu
[18:47:23.0211] looking for mcu nub...no entry from path!
[18:47:23.0211] TiSerialFlasher not supported on this platform. Exiting.
[18:47:23.0211] entering update_baseband
[18:47:23.0211] update_baseband: registering for progress notifications
[18:47:23.0211] create_baseband_update_options: Got imeisv: 8
[18:47:23.0211] baseband updater options = <CFBasicHash 0x17560ca0 [0x336ae0]>{type = mutable dict, count = 6,
[18:47:23.0211] entries =>
[18:47:23.0211] 0 : <CFString 0x12b1f8 [0x336ae0]>{contents = "SystemRoot"} = <CFString 0x17560360 [0x336ae0]>{contents = "/mnt1"}
[18:47:23.0211] 1 : <CFString 0x12b248 [0x336ae0]>{contents = "IMEISwVersion"} = <CFNumber 0x1765a120 [0x336ae0]>{value = +8, type = kCFNumberSInt32Type}
[18:47:23.0211] 2 : <CFString 0x12b2a8 [0x336ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x336e98 [0x336ae0]>{value = false}
[18:47:23.0211] 3 : <CFString 0x12b188 [0x336ae0]>{contents = "forceUpdate"} = <CFBoolean 0x336e90 [0x336ae0]>{value = true}
[18:47:23.0211] 5 : <CFString 0x12b2b8 [0x336ae0]>{contents = "disablePing"} = <CFBoolean 0x336e90 [0x336ae0]>{value = true}
[18:47:23.0211] 6 : <CFString 0x12b1a8 [0x336ae0]>{contents = "DisallowFusiing"} = <CFBoolean 0x336e90 [0x336ae0]>{value = true}
[18:47:23.0211] }
[18:47:23.0211]
[18:47:23.0211] update_baseband: querying baseband info
[18:47:23.0211] bbupdater: BEGIN: Querying info at stage initial
[18:47:23.0211] bbupdater: BEGIN: Preparing Initial stage
[18:47:23.0211] bbupdater: Requested boot mode: kBBUBootModeNone
[18:47:23.0211] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[18:47:23.0211] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[18:47:23.0211] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[18:47:23.0211] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[18:47:23.0211] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[18:47:23.0211] bbupdater: Creating transport, attempts remaining 1...bbupdater: OK
[18:47:23.0211] bbupdater: Baseband VendorID [0x5C6] ProductID [0x9008]
[18:47:23.0211] bbupdater: Modem not booting
[18:47:23.0211] bbupdater: END: Preparing Initial stage
[18:47:23.0211] bbupdater: END: Querying info at stage initial
[18:47:23.0211] bbupdater: BEGIN: Querying info at stage first
[18:47:23.0211] bbupdater: BEGIN: Preparing first stage
[18:47:23.0211] bbupdater: END: Preparing first stage
[18:47:23.0211] bbupdater: Connecting to Loader...bbupdater: OK
[18:47:23.0211] bbupdater: Getting Version...bbupdater: OK
[18:47:23.0211] bbupdater: Loader version: PBL-DownloaderVER1.0
[18:47:23.0211] bbupdater: Fusing disallowed, will treat as fused
[18:47:23.0211] bbupdater: END: Querying info at stage first
[18:47:23.0211] update_baseband: query returned <CFBasicHash 0x1765dbd0 [0x336ae0]>{type = mutable dict, count = 5,
[18:47:23.0211] entries =>
[18:47:23.0211] 2 : <CFString 0x12b458 [0x336ae0]>{contents = "VendorID"} = <CFNumber 0x1755cdf0 [0x336ae0]>{value = +3, type = kCFNumberSInt32Type}
[18:47:23.0211] 3 : <CFString 0x129b68 [0x336ae0]>{contents = "ChipID"} = <CFNumber 0x1765dc50 [0x336ae0]>{value = +4587745, type = kCFNumberSInt32Type}
[18:47:23.0211] 4 : <CFString 0x12b4a8 [0x336ae0]>{contents = "FusingStatus"} = <CFNumber 0x1755cdf0 [0x336ae0]>{value = +3, type = kCFNumberSInt32Type}
[18:47:23.0211] 5 : <CFString 0x12b448 [0x336ae0]>{contents = "CertID"} = <CFNumber 0x17658fb0 [0x336ae0]>{value = +4, type = kCFNumberSInt32Type}
[18:47:23.0211] 6 : <CFString 0x12b2f8 [0x336ae0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[18:47:23.0211] }
[18:47:23.0211]
[18:47:23.0211] update_baseband: requesting baseband firmware data
[18:47:23.0211] update_baseband: received data from host (120519 bytes)
[18:47:23.0211] update_baseband: performing next update stage
[18:47:23.0211] bbupdater: BEGIN: Perform stage at first
[18:47:23.0211] bbupdater: Loading...
[18:47:23.0211] bbupdater: 0x4001a100 of 0x4003d55c (18 percent)
[18:47:23.0211] bbupdater: 0x40022200 of 0x4003d55c (37 percent)
[18:47:23.0211] bbupdater: 0x4002a300 of 0x4003d55c (55 percent)
[18:47:23.0211] bbupdater: 0x40032400 of 0x4003d55c (74 percent)
[18:47:23.0211] bbupdater: 0x4003a500 of 0x4003d55c (93 percent)
[18:47:23.0211] bbupdater: 0x4003d55c of 0x4003d55c (100 percent)
[18:47:23.0211] bbupdater:
[18:47:23.0211] bbupdater: Launching...bbupdater: OK
[18:47:23.0211] bbupdater: END: Perform stage at first
[18:47:23.0211] send_bbupdate_status: sending baseband update status to host
[18:47:23.0211] update_baseband: querying baseband info
[18:47:23.0211] bbupdater: BEGIN: Querying info at stage second
[18:47:23.0211] bbupdater: BEGIN: Preparing Second stage
[18:47:23.0211] bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
[18:47:23.0211] bbupdater: Baseband VendorID [0x5C6] ProductID [0x9008]
[18:47:23.0211] bbupdater: END: Preparing Second stage
[18:47:23.0211] bbupdater: Saying Hello...001035.299696 AppleUSBOHCIPort@3100000::resetAndCreateDevice: failed to address device (0xe00002ed), disabling port
[18:47:23.0211] bbupdater: FAILED(kBBUReturnIOError)
[18:47:23.0211] bbupdater: END(kBBUReturnIOError): Querying info at stage second
[18:47:23.0211] send_bbupdate_status: sending baseband update status to host
[18:47:23.0211] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed connecting to programmer while querying information in the second stage.)
[18:47:23.0211] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[18:47:23.0211] 1: BBUpdater/3: Failed connecting to programmer while querying information in the second stage.
[18:47:23.0211] unable to convert ramrod error 1004
[18:47:23.0211]
[18:47:23.0211] ==== end of device restore output ====
[18:47:23.0269] AMRAuthInstallDeletePersonalizedBundle
[18:47:23.0564] Restore completed, status:3
[18:47:23.0564] Failure Description:
[18:47:23.0564] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[18:47:23.0564] Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[18:47:23.0564] Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[18:47:23.0564] Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[18:47:23.0564] Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed querying baseband info)
[18:47:23.0564] Depth:5 Error:The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed connecting to programmer while querying information in the second stage.)