s5230 не прошивается память

[Siecker]

флэшка не шьется не трется не читается. пробовал с разных адресов. сам рифф вроде бы видит флэшу, РАМ живая а по адресам ни чего не льется. скорости разные пробовал. лежат две такие платы. на одной плате флэшку перекатал не помогло. кто сталкивался, дохлая флэш, проц, связь флэш проц?

[21.02.2012 15:46:10] [START OPERATION_ID = RESURRECT]
[21.02.2012 15:46:19] Open serial port...OK
[21.02.2012 15:46:19] Connecting to the RIFF Box...OK
[21.02.2012 15:46:19] Firmware Version: 1.30, JTAG Manager Version: 1.38
[21.02.2012 15:46:19] Selected Resurrector: [Samsung S5230]
[21.02.2012 15:46:19]
[21.02.2012 15:46:19] Connecting to the dead ************...OK
[21.02.2012 15:46:19] Detected dead ************ ID: 0x07926F0F - CORRECT!
[21.02.2012 15:46:19] Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
[21.02.2012 15:46:19] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[21.02.2012 15:46:19]
[21.02.2012 15:46:19] Resurrection sequence started.
[21.02.2012 15:46:19] Establish communication with the phone...OK
[21.02.2012 15:46:19] Uploading resurrector data into memory...OK
[21.02.2012 15:46:19] Starting communication with resurrector...OK
[21.02.2012 15:46:19]
[21.02.2012 15:46:19] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x00BA (256MB)
[21.02.2012 15:46:19] Flashing the dead ************...
[21.02.2012 15:46:19] ERROR: DCC Loader has reported Error Code = 0x32 (0x00E99C). Trying to recover...OK
[21.02.2012 15:46:19] ERROR: DCC Loader has reported Error Code = 0x32 (0x00E99C). Trying to recover...OK
[21.02.2012 15:46:19] ERROR: DCC Loader has reported Error Code = 0x32 (0x00E99C). Trying to recover...OK
[21.02.2012 15:46:19] ERROR: Stopped due to multiple communication errors. Terminating at 0x0000000000