5800 не включается

[Явор]

принесли с неисправностью не включается
уфс не цепляет, подцепился только через юсб на МТ-боксе
вот лог прошивки

CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&736cf29&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Isa UPDAPP
RAP3NAND
PASUBTOC
UPDAPP
Pooling for device removal...
Device removed
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&20d9f711&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[215.12 MB]...
erasing APE [00040000 to 00082FFF]
erasing APE [00083400 to 003FFFFF]
erasing APE [00400000 to 007FFFFF]
erasing APE [00800000 to 00D5FFFF]
erasing APE [00D60000 to 09E5FFFF]
erasing APE [09160000 to 09E5FFFF]
erasing APE [06560000 to 0915FFFF]
in 11.52s
Flash[92.20 MB]...in 41.66s
* * Processed file in 63.80 seconds
Processing File: RM-356_21.0.025_C01_prd.rofs3.fpsx.image_i_128
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&20d9f711&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[1.24 MB]...in 0.50s
* * Processed file in 0.70 seconds
Processing File: RM-356_21.0.025_prd.rofs2.V05.ppm_i
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&20d9f711&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[30.97 MB]...in 12.36s
* * Processed file in 12.56 seconds
Restarting device...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 1:20 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!

не делает уи сетинги
и не включается по прежнему плата идеально чистая

[ivan-ektb]

а что БП показывает?

[ROMAN_-_666]

Так ты 31 залей пока.
Posted via Mobile Device

[ivan-ektb]

вот темка http://www.mobile-files.ru/forum/showthread.php?t=216233&highlight=5800