v0.914028/UNI
CARD SERIAL: 000&&&&&&
Loaded 51 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
DB2000 only supports 460800,fallback.
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460??????808 CERT:RED
FLASH CID:36 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35785??????574
Model:W900i
Brand:Generic
MAPP CXC article: R5AC011 prgCXC1250252_CHINA_SA
MAPP CXC version: R5AC011
Language Package:APAC_1
CDA article: CDA102418/1
CDA version: R1A
Default article: cxc1250058
Default version: R5AC011
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
USERCODE:0000
Elapsed: 15 secs.
и что интересно под батарейкой imei 00460??????808 и написано prototype not for sale,made in japan.
труба оригинальная
г-н Лазер чем вы можете помочь,а то тем с prototypami не так много,перешивал уже с десяток раз не помогает.:(
the_laser
05.07.2008, 15:37
я не увидел ни одного лога прошивки.
вот логи
v0.914028/UNI
CARD SERIAL: :confused:
Loaded 51 flash descriptors
llbug: port 3 open error: "Не удается найти указанный файл"
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 0 secs.
llbug: port 7 open error: "Не удается найти указанный файл"
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 1 secs.
Open COM port OK
Can't load ID loader !
PROCEDURE WAS STOPPED BY USER
Elapsed: 24 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
FLASH CID:49 COLOR:BROWN
Model:W900i
Brand:Generic
MAPP CXC article: R5AC011 prgCXC1250252_CHINA_SA
MAPP CXC version: R5AC011
Language Package:APAC_1
CDA article: CDA102418/1
CDA version: R1A
Default article: cxc1250058
Default version: R5AC011
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
USERCODE:0000
RESTORATION FILE NOT PRESENT
"R5AC011_CXC1250252_CHINA_SA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
Elapsed: 11 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
Flash ID check:890D
Flash props sent ok
writing D:\INSTALL на проги !!!!!!!!!!!!!!!!!!!!!!!!\I N S T A L L Н А П Р О Г И!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\SETOOL\v0.914029\gdfs_in_ssw_format\w900_gdfs_in_ssw_format.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:16
Will flash 16 blocks...
SSW loading returns:0
Setting up GDFS...
IMEI MISMATCH !!!! POSSIBLE STOLEN PHONE !!!!!
ORIGINAL IMEI:00460101680808
CURRENT IMEI:35785800011574
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "73014615"
Signing...
control keys complete.
full sig complete.
Elapsed: 46 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
FLASH CID:49 COLOR:BROWN
Model:W900i
Brand:Generic
MAPP CXC article: R5BB001 prgCXC1250057_GENERIC_SA
MAPP CXC version: R5BB001
Language Package:APAC_1
CDA article: CDA102418/101
CDA version: R1A
Default article: cxc1250058
Default version: R5AC011
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
USERCODE:0000
RESTORATION FILE NOT PRESENT
"R5BB001_CXC1250057_GENERIC_SA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
Elapsed: 3 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 21 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
Flash ID check:890D
Flash props sent ok
Setting up GDFS...
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "66506870"
Signing...
control keys complete.
full sig complete.
LDR:060118 1727 FILE_SYSTEM_LOADER_SETOOL2_V26
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed: 221 secs.
Will write GDFS now.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
loader prologue not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 12 secs.
Will backup GDFS now.
Open COM port OK
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 2 secs.
Will write GDFS now.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
Flash ID check:890D
Flash props sent ok
Setting up GDFS...
will write 1884910147 variables
gdfsWrite err:F
Exception in GDFS write. maybe bad gdfs file.
Elapsed: 10 secs.
POSSIBLE GDFS FILE DETECTED, EXTRACTING PHONEBOOK
PHONEBOOK NOT DETECTED IN GDFS FILE
Will write GDFS now.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 11 secs.
POSSIBLE GDFS FILE DETECTED, EXTRACTING PHONEBOOK
PHONEBOOK NOT DETECTED IN GDFS FILE
Will write GDFS now.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
Flash ID check:890D
Flash props sent ok
Setting up GDFS...
will write 1174 variables
done
Phone detached
Elapsed: 40 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
FLASH CID:49 COLOR:BROWN
IMEI MISMATCH ! GDFS IMEI:35785800011574
Model:W900i
Brand:Generic
MAPP CXC article: R5AC011 prgCXC1250252_CHINA_SA
MAPP CXC version: R5AC011
Language Package:APAC_1
CDA article: CDA102418/1
CDA version: R1A
Default article: cxc1250058
Default version: R5AC011
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
USERCODE:0000
RESTORATION FILE NOT PRESENT
"R5AC011_CXC1250252_CHINA_SA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
Elapsed: 5 secs.
ALTERNATIVE SECURITY BYPASS DISABLED !
ENABLE "SIGNED MODE" !
Open COM port OK
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 5 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 6 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 6 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 6 secs.
ALTERNATIVE SECURITY BYPASS DISABLED !
ENABLE "SIGNED MODE" !
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:BROWN
Flash ID check:890D
Flash props sent ok
writing D:\ПРОШИВКИ ПОД SETOOL\w900\R5BB001_EU1_MAIN.SSW.cry
CURRENT FLASH FILE CID:49
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:418
Will flash 418 blocks...
SSW loading returns:0
writing D:\ПРОШИВКИ ПОД SETOOL\w900\R5BB001_EMEA1.SSW.cry
CURRENT FLASH FILE CID:49
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:293
Will flash 293 blocks...
SSW loading returns:0
Setting up GDFS...
IMEI MISMATCH !!!! POSSIBLE STOLEN PHONE !!!!!
ORIGINAL IMEI:00460101680808
CURRENT IMEI:35785800011574
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "47316422"
Signing...
control keys complete.
full sig complete.
Phone reverted to RED color.
LDR:060118 1727 FILE_SYSTEM_LOADER_SETOOL2_V26
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
PROCEDURE WAS STOPPED BY USER
Elapsed: 1723 secs.
ALTERNATIVE SECURITY BYPASS DISABLED !
ENABLE "SIGNED MODE" !
Open COM port OK
Can't load ID loader !
PROCEDURE WAS STOPPED BY USER
Elapsed: 1 secs.
сейчас при считывании инфы
v0.914028/UNI
CARD SERIAL: 000:confused:
Loaded 51 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:36 PAF:0 IMEI:00460101680808 CERT:RED
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Open COM port OK
Trying to launch embedded bootloader...
embedded bootloader not responds !
PROCEDURE WAS STOPPED BY USER
Elapsed: 66 secs.
сейчас не дает даже прошить
RESTORATION FILE NOT PRESENT
"R5AC011_CXC1250252_CHINA_SA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
a eta ni achom ni gavarit cibe?
объясни пожалуйста по подробнее:o
ну так что помочь никто не может?
the_laser
08.07.2008, 17:28
телефон прототип, нужна спец прошивка.
плюс, ты уработал erom (теперь надо восстанавливать через тестпойнт).
Такая же ерунда с W900i
А как тестпоинт делать?
Да интересно не знал, что Setool и тестпоинт надо делать.
the_laser
10.07.2008, 04:24
теперь знаешь.
если еще почитаешь и поищешь, поймешь ЗАЧЕМ делать тестпойнт.
зы.
слова "такая же ерунда" - надо говорить в вендиспансере на приеме.
здесь в ходу логи программы.
телефон забрали,тему можно закрыть,всем спасибо за помощь и разъяснения.