Просмотр полной версии : w800 не прошивается
Вот лог
v0.914023/UNI
CARD SERIAL: 00049779
Loaded 51 flash descriptors
Open COM port OK
Abort all operations.
Can't load ID loader !
Elapsed:6 secs.
RECOVERY MODE STARTED
Open COM port OK
REC:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:BROWN
Recovery succefull. Reflash phone now
Elapsed:4 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:RED
FLASH CID:36 COLOR:RED
Can't read SCRC unit
Elapsed:2 secs.
HACKER_KIT
01.03.2008, 11:47
Попробуйте через ЮЗБ кабель
а cid 36 через usb пойдет? (это вопрос)
а cid 36 через usb пойдет? (это вопрос)
Через USB не идет
Nazarevich
01.03.2008, 16:29
Вот лог
v0.914023/UNI
CARD SERIAL: 00049779
Loaded 51 flash descriptors
Open COM port OK
Abort all operations.
Can't load ID loader !
Elapsed:6 secs.
RECOVERY MODE STARTED
Open COM port OK
REC:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:BROWN
Recovery succefull. Reflash phone now
Elapsed:4 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:RED
FLASH CID:36 COLOR:RED
Can't read SCRC unit
Elapsed:2 secs.
попробуй ему иром пролить!через ТП конечно
попробуй ему иром пролить!через ТП конечно
Нет не получается
Will write GDFS now.
ATTACH TESTPOINT NOW, THEN PRESS "READY"
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
loader prologue returns invalid status
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
RECOVERY MODE STARTED
Open COM port OK
Abort all operations.
Elapsed:5 secs.
RECOVERY MODE STARTED
Open COM port OK
REC:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:RED
Recovery succefull. Reflash phone now
Elapsed:5 secs.
Will write GDFS now.
ATTACH TESTPOINT NOW, THEN PRESS "READY"
Open COM port OK
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:16 secs.
RECOVERY MODE STARTED
Open COM port OK
Abort all operations.
Elapsed:5 secs.
ATTACH TESTPOINT NOW, THEN PRESS "READY"
Open COM port OK
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:890D
Flash props sent ok
CID changed succefully.
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V23
loader startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:29 secs.
Nazarevich
01.03.2008, 16:49
Нет не получается
Will write GDFS now.
ATTACH TESTPOINT NOW, THEN PRESS "READY"
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
loader prologue returns invalid status
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
RECOVERY MODE STARTED
Open COM port OK
Abort all operations.
Elapsed:5 secs.
RECOVERY MODE STARTED
Open COM port OK
REC:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:RED
Recovery succefull. Reflash phone now
Elapsed:5 secs.
Will write GDFS now.
ATTACH TESTPOINT NOW, THEN PRESS "READY"
Open COM port OK
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:16 secs.
RECOVERY MODE STARTED
Open COM port OK
Abort all operations.
Elapsed:5 secs.
ATTACH TESTPOINT NOW, THEN PRESS "READY"
Open COM port OK
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900702402 CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:890D
Flash props sent ok
CID changed succefully.
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V23
loader startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:29 secs.
да разбери трубку и припаяй ему ТП!!!
да разбери трубку и припаяй ему ТП!!!
Будьте добры подскажите всю процедуру через тр
Nazarevich
01.03.2008, 17:12
разбераеш телефон,припаиваеш ТП (по рисунку) подключаеш телефон к компу,выбераеш во вкладках USE TESTPOINT,а дальше как обычно-SeTool сам все напишет что делать
разбераеш телефон,припаиваеш ТП (по рисунку) подключаеш телефон к компу,выбераеш во вкладках USE TESTPOINT,а дальше как обычно-SeTool сам все напишет что делать
А куда припаять тп на питание или землю или еще куда
Nazarevich
01.03.2008, 18:27
А куда припаять тп на питание или землю или еще куда
замикаеш на массу