PDA

Просмотр полной версии : Free Upgrade V2.4 For C550 Blue Button Clip!!!



shirokov
12.05.2004, 03:53
Free Upgrade V2.4 For C550 Blue Button Clip !!!!

Hello to every************,

alexGSM-team presents for every customer from us the following update:

Upgrade Version: v2.4 (Public Release, other were internal)
Upgrade Method: EEPROM 24C128 file ready to be uploaded
Upgrade Platform: C550 BLUE BUTTON CLIP
Download link:
http://www.movitel.net/ftp/EEPROM_24C128_Upgrade_v2.4_for_C550_Blue_Button.zip


Upgraded Unlock Phone Models and new Firmware versions:

C350 New SW version (Available on following Countries are: UK, ES, HR, FR and PT)
C350L New SW version (Available on following Countries are: ES and PT)
C35XV New SW version (Available on following Countries are: UK, ES, FR, CN and PT)


New Features Included in this Upgrade:

- Repair Contact Provider in C35X phones caused by other softwares and servers after bad unlock procedures and partial flashing. (Thanks to every************ who supplied destroyed and non working C35X phones destroyed with other solutions for make this upgrade)
- Fix phones with network signal lost after using other solutions.
- Reset User Code and Security Code in the new Upgraded Phone Models.
- Comunication Optimized and Improved for faster Unlock in all platforms supported by this clip.


Easy Upgrade Procedure:

1.- You need to use the free software PonyProg from www.lancos.com
2.- Go to Interface Setup and set up Easy I2C I/O, Port Parallel, LPT1.
3.- Plug the Upgrade cable (supplied for free with every C550 Blue button clip) into LPT1 and you can test/check is the connector exist or not.
4.- Go to Device and select 16-bits eeprom and type will be 24128
5.- Load EEPROM_24C128_Upgrade_v2.4_for_C550_Blue_Button.bin Upgrade File.
6.- For update the eeprom, you need to power with 9V the clip.
7.- Press the clip action button and keep it pressed until the procedure finish.
8.- From Ponyprog press Write Device and the programming will start.
9.- Programming Operation will need around 4-5 seconds. After Write procedure, Verify procedure will start and another progress bar will be prompted, now It will need only 2-3 seconds. (Working time always will depend of your computer CPU speed) Anyway in no case will be more than 10 seconds

NOTE: Please dont forget to keep pressed the action button in the writing and verifying procedures

Of course you don’t need to open the clips because Upgrade connector is available when the clip is closed and the cable can be connected to this connector without opening the clip.

Please, use Win95/Win98/Win98se/WinMe if you don’t want to get crazy with ponyprog =)

Sincerily Regards to every************ who supported and still supporting alexGSM Original Products and the whole Team, we are really thankful for this and this is our gift to the ppl who likes the real business and the real products

Murphy,
alexGSM-team
-------------------------------------------------------------------

Прошивку также можно взять здесь:
http://www.unlockmovil.com/modules.php?name=Downloads&d_op=viewdownload&cid=6

wsw_gsm_new1
12.05.2004, 10:51
А где купить мжно и за сколько?